Bosch Appliances 3.5 Call characteristics, 46.1Introduction, 46.2Call macro, Create a call macro

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 381

46 Call characteristics

46.1Introduction

Using the Call characteristics pages, call macros can be defined (see section 43.2).

Call characteristics

Call macro

figure 46.1: Call characteristics pages

46.2Call macro

46.2.1 Introduction

On the Call macro page, call macros can be defined. Call macros are used to make calls.

figure 46.3: Add call macro, step 2

3Enter the name of the new call macro in the Name field (see figure 46.4 for an example). It may consist of up to 16 characters.

46.2.2 Create a call macro

Proceed as follows to create a new call macro:

1Go to Configure > Call characteristics > Call macro. A screen similar to the one in figure 46.2 appears in the main frame of the web interface.

figure 46.2: Add call macro, step 1

2Click the Add button to add a new call macro. A screen similar to the one in figure 46.3 appears in the main frame of the web interface.

figure 46.4: Add call macro, step 3

4Click the OK button to add the call macro to the list of call macros in the system. A screen similar to the one in figure 46.5 appears in the main frame of the web interface.

Bosch Security Systems 2011-02