Praesideo 3.5 Installation and User Instructions EN54-16: 2008

en 33

Clause / Requirement

7.6.1.2The silencing procedure may allow for the completion of messages in the process of being broadcast.

7.6.2Manual silencing of the voice alarm condition (option with requirements)

7.6.2.1It shall be possible to manually silence the voice alarm message from the VACIE at access level 2.

7.6.2.2Following silencing, it shall be possible to

re-activate the voice alarm message at access level 2.

7.7 Reset of the voice alarm condition

7.7.1 Reset of the voice alarm condition from the CIE

Where the voice alarm condition has been triggered from the CIE, the VACIE shall respond appropriately to a reset instruction from the CIE.

7.7.2Manual reset of the voice alarm condition (option with requirements)

7.7.2.1It shall be possible to reset the voice alarm condition from the VACIE at access level 2 by means of a separate manual control. This control shall be used only for reset and may be the same as that used for reset from the fault warning condition.

7.7.2.2Following a reset operation, the indication of the correct functional condition corresponding to any received signals shall either remain or be re-established within 20 s.

7.8Output to fire alarm devices (option with requirements)

In addition to the voice alarm outputs the VACIE may have provision for the automatic transmission of fire alarm signals to fire alarm devices such as beacons and vibrating devices. In this case, the following shall apply:

ait shall be possible to de-activate the fire alarm devices at access level 2;

bfollowing de-activation, it shall be possible to re-activate the fire alarm devices at access level 2;

cthe fire alarm devices shall not be de-activated automatically;

dit shall be possible to configure the VACIE at access level 3 to automatically reactivate the fire alarm devices if an alarm is reported in an other zone.

Compliance

Signature

A voice alarm call that is stopped while not being finished will still complete the running message. Praesideo also offers the possibility to abort running calls in which case a running message will not be completed.

Praesideo allows configuration of two different voice alarm reset actions: one that can only reset a voice alarm condition when all running alarm calls have been finished, and one that aborts all still running alarm calls.

Praesideo offers the possibility to stop voice alarm calls by de-activating the contact or key that started the call. Using the ‘Stop’ action, also calls started by a ‘Start’ action from a different key or contact can be aborted.

Voice alarm call can be re-activated by starting that call again from a contact, a key or the Open Interface.

Praesideo is compliant.

See 7.6.1.1.

To reset the voice alarm condition an Acknowledge Emergency and Reset Emergency action is required. Praesideo allows configuration of two different voice alarm reset (Emergency Reset) actions: one that can only reset a voice alarm condition when all running alarm calls have been finished, and one that aborts all still running alarm calls.

After a reset operation, the Praesideo system will immediately indicate the functional condition it is currently in. It will also immediately respond to received signals that will bring it into another functional condition.

Praesideo is compliant.

Fire alarm devices can be activated from control outputs that are assigned to zones, which themselves are assigned to calls. If a call is started via a ‘Start’ action, the zone with the associated control output can be added to that call by means of an additional ‘Start’ action for the same call macro. Then it can be de-activated also by de-activating that ‘Start’ action, or using an associated 'Stop' action.

Re-activating the ‘Start’ action, after being de-activated, will add the zone with the associated control output to the call again. The control output will activate the alarm device again.

Using a 'Start' action with Momentary behavior, the fire alarm devices will run in parallel with the original call to which they are assigned. In case the fire alarm devices should continue when the original call is stopped, then its 'Start' action should use Single-shot behavior to remain activated until a 'Stop' action occurs.

Praesideo allows multiple calls to be started simultaneously from the same key or contact. An alarm in an other zone that triggers the Praesideo system for action in that zone may also start a call that activates or re-activates the alarm device that is associated to a different zone.

Bosch Security Systems 2011-02

Page 32 Page 34
Page 33
Image 33
Bosch Appliances 3.5 manual Clause / Requirement
Page 32 Page 34

3.5 specifications

Bosch Appliances has established itself as a leader in home technology, known for its commitment to quality, innovation, and sustainability. The Bosch 3.5 series epitomizes this ethos, offering a range of appliances designed to enhance everyday living while ensuring energy efficiency and ease of use.

At the heart of the Bosch 3.5 line is the integration of advanced technologies optimized for performance. One standout feature is the EcoSilence Drive, a brushless motor used in dishwashers and washing machines. This technology ensures quieter operation while offering reliability and energy savings. Customers can appreciate a peaceful home environment while benefiting from powerful cleaning options.

Another significant characteristic of Bosch appliances is their focus on precision and customization. The Bosch 3.5 series includes models with adjustable shelving and customizable interior layouts, allowing consumers to maximize storage according to their needs. The flexibility in functionality is complemented by features such as the VarioFlex and VarioDrawer systems in dishwashers, which offer additional loading options for better convenience.

Zones such as cooking and refrigeration have also seen remarkable improvements in the 3.5 series. The induction cooktops utilize speed and precision to deliver quick cooking experiences while maintaining safety, thanks to features like automatic shut-off and child lock. Furthermore, Bosch refrigerators included in this line employ innovative cooling technologies, such as the Dual Compressor system, which ensures optimal freshness for longer by preventing odor transfer between compartments.

Sustainability is a key characteristic of Bosch products. The 3.5 series appliances are designed to meet stringent energy efficiency standards, with many models Energy Star certified. This commitment to environmental stewardship resonates with eco-conscious consumers who seek to reduce their carbon footprint without sacrificing performance or style.

Aesthetically, Bosch appliances in the 3.5 line boast sleek designs that harmonize with modern kitchen aesthetics. With stainless steel finishes, multi-functional interfaces, and intuitive controls, these appliances not only perform exceptionally but also contribute to a sophisticated home environment.

In conclusion, Bosch Appliances 3.5 series integrates cutting-edge technology, sustainable practices, and user-centric designs, making them an optimal choice for modern households looking for reliability, efficiency, and style. Whether for cooking, cleaning, or preservation, Bosch continues to set the standard in home appliances.
Top Page Image Contents