Bosch Appliances 3.5 18: Cutting a fiber, 20 Stripped optical fibers, 19: Stripping a fiber, en

Praesideo 3.5 Installation and User Instructions 6 Installation Accessories

en 286

14Close the tool to fix the cable and pull the ‘trigger’ to cut the fiber (see figure 29.18).

17Close the tool and pull the fiber out to strip the sheath from it.

figure 29.18: Cutting a fiber (3)

15Repeat steps 13 and 14 for the other plastic optical fiber in the cable. Both fibers now have the required length.

16Slide one of the fibers into the front part of the POF cutter/stripping tool (tool 6, see figure 29.19).

Note

Do not forget to remove the piece of sheath

from the tool.

18Repeat steps 16 and 17 for the other fiber in the cable. See figure 29.20 for the result of this part of the cable-connector installation procedure.

AB

figure 29.20: Stripped optical fibers

figure 29.19: Stripping a fiber

Bosch Security Systems 2011-02