Bosch Appliances 3.5 manual 4 Configure network controller, step, 1: General configuration

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 340

8Submit the changes. Note that the changes are not permanent until the configuration is saved

(see section 40.4.4 and section 40.4.5).

43.2.2 General

3

5 4 6

figure 43.4: Configure network controller, step 3

table 43.1: General configuration

Item	Value	Description
Mains power	On	Specifies whether the mains power must be supervised.
supervision	Off	When Mains power supervision is On and the mains
		power is failing, a fault event is generated. Setting Mains
		Power Supervision to Off when mains power is used,
		results in a system that does not detect mains power
		failures.
Back-up power	On	Specifies whether the back-up power must be supervised.
supervision	Off	When Back-up power supervision is On and the back-up
		power is failing, a fault event is generated. Setting
		Back-up power supervision to Off when back-up power is
		used, results in a system that does not detect back-up
		power failures.

Bosch Security Systems 2011-02