Bosch Appliances 3.5 manual 22.2Controls, connectors and indicators, 2: Exterior

2011-02 Installation and User Instructions 5 Call Stations

en 251

22.2Controls, connectors and indicators

22.2.1 Exterior

The exterior of the call station interface (see figure 22.2) contains the following:

1 System bus - A system bus connector to connect the call station interface to other Praesideo equipment (see section 22.3.2).

2System bus - A system bus connector to connect the call station interface to other Praesideo equipment (see section 22.3.2).

3Lid - A lid that provides access to the jumpers (see section 22.2.2). The rear side of the lid contains a label with explanation about the internal settings.

4Fault LED - A yellow fault LED that provides information about the status of the call station interface (see section 22.5).

5Power LED - A green power LED that provides information about the status of the call station interface (see section 22.5).

6RJ45 connector - A connector to connect the call station interface to a PRS-CSR Remote Call Station or PRS-CSRK Remote Call Station Kit.

7External power supply - A connection for an (optional) external power supply (see section 22.3.3).

8Service connector - A connector used for manufacturing. Not for normal use.

Caution

Do not connect the connections 6 and 8 to any Telecom or Ethernet network. These connections are dedicated for PRS-CSR or PRS-CSRK and service equipment.

7 8 6

3

4

5

1 2

figure 22.2: Exterior

Bosch Security Systems 2011-02