Bosch Appliances 3.5 manual Configuration file version mismatch, en, Configuration file error

Praesideo 3.5 Installation and User Instructions 10 Events

en 423

Event message:

Configuration file error

Originator:

----

Extra information:

This fault event can only occur when the network controller is started. This fault event aggregates to a System fault.

Description:

Logs a consistency fault in the configuration file. (The default configuration file will be loaded.)

Resolve:

Immediately after acknowledgement.

Recommended action:

•Open the configuration file with the Configuration Printing Tool and check for errors.

•Create a new configuration file using the information that is shown by the Configuration Printing Tool.

Event message:

Configuration file version mismatch

Originator:

----

Extra information;

Version of the configuration file, version of the system software.

This fault event can only occur when the network controller is started and the version number of the configuration file is 1.4 or higher.

Description:

Logs the mismatch of the version number of the configuration file and the version number of the system software.

Resolve:

Immediately after acknowledgement.

Recommended action:

•Open the configuration file with the Configuration Printing Tool and check for errors.

•Create a new configuration file using the information that is shown by the Configuration Printing Tool.

Event message:

Control input line failure: (control input)

Originator:

Control input in which the fault occurred. Extra information:

This fault event cannot be generated by LBB4430/00 Call Stations Basic and open interface clients. Description:

Logs the failure of a supervised control input. Resolve:

When the fault disappears or when the unit disconnects.

Recommended action:

Check the control input and the cables that are connected to it. If necessary, repair them.

Event message:

Fault input

Originator:

Control input, key or open interface client that generated the fault event.

Extra information:

Description that is entered with the configuration software.

Description:

Logs the activation of a control input or key that was configured as a Fault input, or an open interface client that generated a reportFault command.

Resolve:

•If the fault was generated by a control input or key: when the Fault Input is deactivated or when the unit disconnects.

•If the fault was generated by an open interface client: when the open interface client reports that

the error is resolved or when the open interface client disconnects.

Recommended action:

The recommended action depends on the purpose for which the specified control input, key or open interface client was configured.

Bosch Security Systems 2011-02