Bosch Appliances 3.5 manual 21.3Installation, 12: Installation, 14: Tyco AMP 169111-1pliers

2011-02 Installation and User Instructions 5 Call Stations

en 248

21.3Installation

The remote call station kit contains six holes for installation purposes (see figure 21.12).

60
- 0.2	3,2 +/- 0.1
+/
	(6x)
130
60
5
5	108
	118 +/- 0.2

figure 21.12: Installation

The kit is delivered together with Tyco AMP pin headers and Tyco AMP 1-141708-1 shrink-contacts (see figure 21.13) to facilitate the connection of wires to the PCB. These pin headers are suitable for wires with a cross-section from 0.2 to 0.56 mm2. It is possible to solder the wires to the pin headers.

Note

If the remote call station kit is installed in a vibrating surrounding (e.g. a ship), glue the pin header to the PCB.

To connect the wires to the shrink-contacts, use one of the following pliers:

•Tyco AMP 169111-1 pliers (see figure 21.14)

•Tyco AMP Modu 4 169481-1 pliers (see figure 21.15)

	169111-1
				6	4 2
0.75-	1 1.5 2.5	4	5	mm	5 3 1
				2
0.5

figure 21.14: Tyco AMP 169111-1 pliers

MODU 4	0
		0
	0 .
	.
	093
	0.2 0.56
	0	0
	.
	1	1
	4	.
16 9 4 81 - 1		2

figure 21.15: Tyco AMP Modu 4 169481-1 pliers

figure 21.13: Tyco AMP 1-141708-1 shrink-contact

Bosch Security Systems 2011-02