Bosch Appliances 3.5 manual Logging Viewer, 57.1Introduction, 57.2Requirements, 57.3Installation

Praesideo 3.5 Installation and User Instructions 11 Optional Software

en 454

57 Logging Viewer

57.1Introduction

With the Logging Viewer, the events logged by the Logging Server in a database, can be viewed. Typically, the Logging Viewer runs on a PC that is connected to the PC on which the Logging Server (see chapter 56) runs. The database is located at the same PC as the Logging Server.

57.2Requirements

The Logging Viewer can run on any PC that meets the following minimum requirements:

•Operating system:

Microsoft® Windows XP with Service Pack 1 or Microsoft® Windows Vista or

Microsoft® Windows 7

•Network connection: 100 base-T

•1 GB RAM

57.3Installation

Proceed as follows:

1Start the PRS-SW Praesideo Software DVD (see section 35.2).

2Click Optional > Logging Application Viewer. A File Download window appears.

3Click the Open button to start the setup program of the Logging Viewer. A screen similar to the one in figure 57.1 appears.

The Logging Viewer is able to show its user interface and the logging events in different languages. During installation of the Logging Viewer a number of language file folders have been installed in:

\Program Files\Bosch\Praesideo\Programs\Logging Viewer. The language file folders have names according to the international 2-letter language code (ISO 639), e.g. 'en' for English, 'ru' for Russian.

5Check this folder to see if your language is available. If a language folder exists for the language of the installed Windows operating system, then the

Logging Viewer is in that language. If a different language is needed and a language folder exists for that language, proceed as follows:

6Add a language parameter to the Logging Viewer program. The parameter is the 2-letter language abbreviation, e.g. " fi", i.e. a space followed by the language code. For the Logging Viewer create a short cut for the program file, then right click on the short cut (can be on the desktop too), click properties

and select the tab short cut.

7Add the " fi" parameter to the target description that ended with .exe", so after the double quote. Use the short cut to start up the program. Of course, replace " fi" with the language abbreviation of your choice.

57.4Start

Proceed as follows:

1Go to Start > Programs > Bosch > Praesideo.

2Click Logging Viewer. A screen similar to the one in figure 57.4 appears.

•When the Logging Viewer has been started and faults have occurred, its icon shows the fault condition (see figure 57.2).

figure 57.1: Logging viewer setup

4Follow the instructions that are displayed on screen. A notification is displayed when the installation is finished.

figure 57.2: Logging Viewer icon (faults)

Note

In Windows Vista and Windows 7, the taskbar buttons should be configured to ‘Never combine’ similar taskbar buttons. Otherwise the fault condition will not be shown in the tasbar.

Bosch Security Systems 2011-02