Bosch Appliances 3.5 8.7.4Main menu, 8.7.5Set monitoring options, 8.7.6View version information

Praesideo 3.5 Installation and User Instructions 4 Amplifiers

en 150

8.7.4Main menu

The Menu ... item provides access to the main menu.

table 8.8: Main menus

Menu item		Description
1	Monitoring	Go to the Monitoring submenu.
		See section 8.7.5.
2	Setup	Go to the Setup submenu. See
		section 8.7.6 (and further).

8.7.5Set monitoring options

The Monitoring submenu is used to set which signal is sent to the monitoring headphones. It can be one of the audio outputs or no signal at all. It is not possible to set the volume of the audio outputs on the monitoring headphones. This means you always hear the audio output at the monitoring headphones at the same volume as it is broadcast.

table 8.9: Monitoring submenu

Menu item	Option	Value 1	Description
1 Monitoring	Source:
	- Output n	Output nr:	The signal from audio output n is available
		1 to 8	on the monitoring headphones output.
	- Off*		The monitoring headphones output is off.

8.7.6View version information

The Serial Number, HW Version and SW Version

submenus are used to obtain version information about the power amplifier.

table 8.10: Version information menu items

Menu item	Value (read-only)	Description
2A Serial Number	e.g. 07.0.0025B	Shows the hexadecimal serial number.
2B HW Version	e.g. 01.01	Shows the hardware version.
2C FW Version	e.g. 3.00.1419	Shows the version number of the firmware. This must be the same for
		all units in the system.

Bosch Security Systems 2011-02