Bosch Appliances 3.5 manual Resetting fault events

Praesideo 3.5 Installation and User Instructions 10 Events

The information about the fault events (see chapter 54) describes how the fault events are resolved.

51.4.5 Resetting fault events

51.4.5.1Introduction

Resolved fault events can be reset:

•Using the network controller (see section 51.4.5.2).

•Using control inputs or keys (see section 51.4.5.3).

•Using the open interface (see section 51.4.5.4).

•Using the Logging Viewer (see chapter 57).

Note

When all faults are reset, the Fault alarm indicator outputs are deactivated.

51.4.5.2 Network controller

Resolved fault events can be reset using the Faults...

menu of the network controller (see section 5.6.5). Using this menu it is possible to reset individual fault events as well as all resolved fault events in the system.

51.4.5.3 Control input or key

Resolved fault events can be reset using control inputs or keys to which an Acknowledge/Reset action has been assigned (see section 47.3.23). However, such a control input or key resets all resolved fault events in the system. It is not possible to reset individual faults using a control input or key.

51.4.5.4 Open interface

Resolved fault events can be reset using the open interface (see the Open Interface Programming Instructions).

en 414

Bosch Security Systems 2011-02