Bosch Appliances 3.5 manual Call events list, Call change, Call end, Call start, Call timeout

Praesideo 3.5 Installation and User Instructions 10 Events

en 418

53 Call events list

Call events in alphabetical order:

Event message:

Call change

Originator:

Control input, Open Interface client or unit, that caused the change..

Extra information:

Name(s) of the output(s) that were removed from the routing and the name(s) of the output(s) that were added to the routing.

Description:

Logs a change in the routing of a call.

Recommended action:

----

Event message:

Call end

Originator:

Control input, Open Interface client or unit, that caused the end of the call.

In case of an overruled call, or in case of lost resources, or when the system decides to end the call, the network controller is the originator.

Extra information:

In case the call has been stopped by the originator, then it is shown which phase of the call was completed.

In case the call has been aborted, then it is shown in which phase of the call this happened and by whom. Description:

Logs the end of a call. Recommended action:

----

Event message:

Call start

Originator:

Control input, key, open interface client or unit that started the call

Extra information:

In case the call is a replay, reference is made to the original call by means of the Call ID of the original call. The macro name for the call is displayed, followed by the priority of the call, the routing scheme, the timing scheme, the name of the start chime, the names of the messages, the number of message repetitions, 'Speech' if the call has live speech, the name of the end chime and finally the routing of the call. Description:

Logs the start of a call. Please note that a premonitored call is always non-partial even if the broadcast call is partial, because it is only sent to the monitor loudspeaker.

Recommended action:

----

Event message:

Call timeout

Originator:

The network controller. Extra information:

List of zones to which the stacked call was not delivered.

Description:

Logs the timeout of a stacked call.

Recommended action:

----

Bosch Security Systems 2011-02