Bosch Appliances 3.5 en, EN60849 - 5.8 Marking and symbols for marking, EN60849 - 5.10 Connectors

Praesideo 3.5 Installation and User Instructions EN60849: 1998

en 22

EN60849 - 5.7 Climate and environmental conditions

Requirement	Compliance	Signature
As all or part of the system may be installed inside or	Praesideo specifications exceed the environmental
outside buildings, under various climatic and	requirements given by EN60849:1998.
environmental conditions, and exposed to possible
mechanical damage, full information on the conditions
under which the system is required to operate shall be
included in the system specification. For tests, refer to
IEC60068-1 (environmental testing).
When not otherwise specified, equipment shall operate
in accordance with the system specification under the
following conditions:
a Control and amplification equipment and
associated battery power supplies:
• Ambient temperature -5 °C to + 40 °C.
• Relative humidity 25% to 90%.
• Air pressure 86 kPa to 106 kPa.
b All other equipment:
• Ambient temperature -20 °C to +55 °C.
• Relative humidity 25% to 99%.
• Air pressure 86 kPa to 106 kPa.
EN60849 - 5.8 Marking and symbols for marking
Requirement	Compliance	Signature
Equipment shall be permanently marked with	Compliant.
information regarding its function.
Terminals and controls shall be permanently marked	Compliant.
with information regarding their function, characteristics
and polarity.
The marking shall be such that it shall be possible to	Compliant.
adjust the user controls and to confirm their positions
accurately in conformity with the information given in
the user instructions.
Marking shall preferably include letter symbols, signs,	Compliant.
numbers and colors that are internationally
comprehensible. Reference is required to IEC60027
and IEC60417. Marking not included in these standards
shall be clearly explained in the user instructions.
EN60849 - 5.9 Electrical matching values
Requirement	Compliance	Signature
For the electrical matching values, reference is required	Compliant (specified in Technical data sections).
to IEC61938 unless otherwise specified.
EN60849 - 5.10 Connectors
Requirement	Compliance	Signature
Connectors shall comply with IEC60268-11 or	Connectors comply to IEC60268-11 or IEC60268-12.
IEC60268-12. Requirements for fire resistance of	Additional requirements are the responsibility of the
connectors may also be stipulated by the relevant	installer.
authorities.

Bosch Security Systems 2011-02