Bosch Appliances 3.5 20: Configure time synchronization, 21: Change configuration password, en

Praesideo 3.5 Installation and User Instructions 11 Optional Software

en 469

codes of the users, with Direct access disabled. If Direct access is enabled, then a TI user (Telephone Interface user) must be selected from the list of configured users. The predefined calls associated with this user are then valid for all users with direct access to the system via this SIP account. See section 59.5.4.11.

59.5.4.13 Configure Time Synchronisation…

In this item you can enable (default) or disable time synchronization of the connected and configured network controllers. It uses the PC Call Server time as master.

figure 59.20: Configure time synchronization

Pressing the Synchronize now button (only enabled when the client has a connection with the PC Call Server) will result in an immediate time synchronization of all connected network controllers.

59.5.4.14Change Configuration Password…

This item allows you to change the configuration password. After installation of the PC Call Server the default password is empty. The maximum length of the password is 16 characters, there is no minimum. You should fill in the old password and a new password, which has to be confirmed. This option is not available when working offline.

figure 59.21: Change configuration password

59.5.4.15 Enter License Key…

In this item you can enter the license key to enable the full functionality of the application. This option is not available when working offline.

figure 59.22: Enter license key

The license key identifies the number of network controllers that can be controlled and the major software version number of the PC Call Server (that matches the Praesideo core release).

The license key window shows the current software version number ("-" when no valid key has been entered in the past), the number of licensed network controllers ("0" when no valid key has been entered in the past) and the serial number of the dongle that is currently attached to the PC ("-"when no valid dongle is attached).

You can get the required license key from the Bosch Security Systems registration website after registration of the PC Call Server authorization number, the authorization number for additional network controllers (if the system contains more than one network controller), the authorization number of the PC Call Station Client and/or the authorization number of the PC Telephone Interface Client. This key is linked to the unique serial number of the dongle that comes with the PC Call Server. That number is shown in this window and needs to be entered on the registration website to make the link.

The application is only fully functional if the correct dongle is present in a USB port of the Call Server PC. Unlicensed PC Call Station Clients can only monitor ongoing calls in the system without the possibility to make calls. If the dongle is removed from a licensed system, a count down timer starts, and calls cannot be started anymore from a PC Call Station Client after that time. An unlicensed PC Telephone Interface Client can not be used to make calls using a telephone. It will only give a (voice) response to the caller that there is no valid license.

Bosch Security Systems 2011-02