Bosch Appliances 3.5 25.4Installation, 25.5Operation, 7 Installation, Status LED indications

Praesideo 3.5 Installation and User Instructions 6 Installation Accessories

en 267

Note

The pin numbers are also indicated on the inside of the connector.

For detailed connector assembly instructions, see appendix B.

Warning

For safety reasons, you must use a current limited external power supply complying with the 60065 standard for audio/video usage or equivalent, with a maximum output current of 5A, or you must use an external fuse (5A max, slow) in the wiring to the Kycon KPP-4P connector.

For application in emergency sound systems in Europe, the installer must use a power supply with EN54-4 certification.

Caution

For USA: only use a power supply of the type Mean Well PLN-30-24, PLN-30-36, PLN-30-48, PLN-60-24, PLN-60-36, PLN-60-48, PLN-100-24, PLN-100-36 or PLN-100-48.

For CANADA: only use a power supply of the type Mean Well PLN-30-24, PLN-30-36, PLN-60-24, PLN-60-36, PLN-100-24 or PLN-100-36.

Other types of power supply are not tested with Praesideo and may cause harm.

25.4Installation

The network splitter can be attached to a wall or any other flat surface using a bracket (see figure 25.7). The distance (d) between the holes in the bracket is 40 mm.

figure 25.7: Installation

Mounting of this bracket and the unit on a drywall sheet construction requires screws with a minimum screw length of 22 mm (7/8") and a minimum diameter of

2.5mm (3/32"). Mounting was evaluated for use on a drywall surface only.

25.5Operation

table 25.2:	Status LED indications
Yellow	Green	Status
(Fault)	(Power)
Off	Off	No power
On	Off	No network or network fault
Off	On	Functioning correctly

Bosch Security Systems 2011-02