Bosch Appliances 3.5 manual Menu bar, •Options, •Export, •Print, •Exit Closes the Logging Viewer

Praesideo 3.5 Installation and User Instructions 11 Optional Software

en 457

57.6.2 Menu bar

57.6.2.1Introduction

The menu bar contains the following menus:

•The File menu (see section 57.6.2.2)

•The View menu (see section 57.6.2.3).

•The System menu (see section 57.6.2.4).

•The Action menu (see section 57.6.2.5).

•The Help menu (see section 57.6.2.6).

57.6.2.2 File

The items in the File menu are used to export and print events and to configure the Logging Viewer. It contains the following items:

•Options

Opens the Options window that is used to configure the Logging Viewer (see section 57.5).

•Export

Exports all events in the current event view to a comma separated values file (*.csv). This file can be opened with, for example, Microsoft® Excel.

•Print

Prints all events in the current event view or prints a selected block of successive events. (To select a block of events: click the first event and then hold the <Shift> key and click the last event.)

•Exit

Closes the Logging Viewer.

57.6.2.3 View

The items in the View menu are used to set the event viewing options. It contains the following items:

•Recent

Shows all recent events. The number of displayed recent events is defined by the Logging Server window (see section 56.7.4.2).

•Historical

Shows historical events. These are retrieved from the logging database (see section 56.7.4). When this item is selected, a calendar appears in which a start date (Start Date) and an end date (End Date) can be selected. When the number of historical events is greater than 10000, the Logging Server delivers the events in blocks to the Logging Viewer. Use the Next Block and Prev Block buttons to scroll through the blocks (see section 57.6.4).

•Refresh

Refreshes the list of events.

Note

New events are only shown in the Recent view. The Historical view does not show new events.

57.6.2.4 System

The items in the System menu are used to select the system from which the events are displayed. The list of available systems is generated by the Logging Server to which the Logging Viewer is connected (see section 56.7.2). When All is selected, the events from all systems are displayed, including events from disabled systems and events from non-configured systems. Events generated by the Logging Server itself can be selected separately.

57.6.2.5 Action

The items in the Action menu are used to acknowledge and reset fault events. It contains the following items:

•Acknowledge All Fault Events

Acknowledges all new fault events in all systems that are connected to the Logging Server. The user must log on to the Logging Server to acknowledge fault events.

•Reset All Fault Events

Resets all acknowledged fault events in all systems that are connected to the Logging Server. The user must log on to the Logging Server to reset fault events.

•Log Off

Logs the user off from the Logging Server.

57.6.2.6 Help

The item in the Help menu provides version information about the Logging Viewer.

Bosch Security Systems 2011-02