Bosch Appliances 3.5 manual 5: Add call macro, step, 5Configure the contents of the call macro

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 382

figure 46.5: Add call macro, step 4

5Configure the contents of the call macro:

•Select the priority of the call macro from the Priority list.

•Select the routing scheme of the call macro from the Routing Scheme list (see section 3.2.4 for more information). If the routing scheme is set to Stacked, the Time out (min.) and Forward on release of controls appear. Time out sets the maximum time the call will be kept in memory for later broadcast. After this time it is deleted. Forward on release of gives the option to select whether a stacked call is forwarded to each zone individually when it is available again, or to all remaining zones at once.

•If the call must use a start tone, select a tone from the Start tone dropdown list. See appendix A for a list of available tones and chimes. Adjust the attenuation to set the volume of the tone.

•If the call must contain recorded messages, select them in the left box and click the > button to add them to the Messages box of the call macro. Use the Repetitions box to specify how many times the recorded messages must be repeated. See section 44.2 for information about recorded messages. Adjust the attenuation to set the volume of the messages.

•If the call must contain live speech, set the Live speech option to Yes. If the call does not contain live speech, set it to No. Adjust the attenuation to set the volume of the live speech.

•If the call must use an end tone, select a tone from the End tone dropdown list. See appendix A

for a list of available tones and chimes. Adjust the attenuation to set the volume of the tone.

•If Live speech is set to Yes, use the Audio input list to specify the input that must be inserted. Select Default if the live speech is originating from a call station.

•If Schedule is set to Enabled, call scheduling is enabled. Enter the start time of the first call in the Start time field and the interval period in the Interval field. After the End time, the call will not be repeated. Specify also the days on which the call scheduling is active.

•If Live speech is set to Yes, use the Timing scheme list to specify the timing scheme of the call (see sec- tion 3.2.5).

•The timing scheme can be used to select Immedi- ate broadcast of a call. If a call stacker is included in the system, and Live speech is set to Yes, Time-shiftedbroadcast or time-shifted with Pre-monitoris also possible. A time-shifted call is broadcast upon completion of the original call or after the local pre-monitor phase has finished.

Note

When Live speech is set to Yes, call scheduling is not possible and the fields for call scheduling are not visible. When Live speech is set to No the timing scheme is fixed to Immediate.

•The maximum duration of a call can be config- ured by selecting one of the following options from the Maximum call duration droplist: 10 s, 20 s, 40 s, 1 min, 2 min, 5 min, 10 min, 20 min, 30 min and Unlimited (default).

A maximum call duration avoids blocking of zones by a high priority call that was started but not stopped, either by accident or because it con- tains e.g. infinitely looping messages.

Note

Do not limit the Maximum call duration when the Routing scheme is set to Stacked or when the Schedule is enabled.

Bosch Security Systems 2011-02