Diagnostic Error Code | FRU/Action | |
|
| |
1. See “Undetermined problems” on page 71 | ||
unknown | 2. | Flash the system and |
| ||
|
| (flashing) the BIOS from a disc” on page 469 |
| 3. | Replace component under function test |
|
| |
1. Power supply | ||
limit error | 2. | System board |
| ||
|
| |
1. Voltage Regulator Module (VRM) | ||
Module error | 2. | Microprocessor |
| ||
| 3. | System board |
|
| |
No action | ||
|
| |
1. Flash system | ||
| 2. | System board |
|
| |
Information only | ||
|
|
|
1. | Press F3 to review the log file | |
exceeded | 2. | |
| ||
|
| |
1. Make sure the component that is called out is | ||
|
| connected and/or enabled. See Chapter 6 “Using the |
|
| Setup Utility program” on page 43 |
| 2. | |
| 3. | Replace the component that is called out in warning |
|
| statement |
| 4. | Replace the component under test |
|
| |
1. If a component is called out, make sure it is | ||
|
| connected and/or enabled |
| 2. | Flash the system and |
|
| (flashing) the BIOS from a disc” on page 469 |
| 3. | Go to “Undetermined problems” on page 71 |
|
| |
1. See “Undetermined problems” on page 71 | ||
unknown | 2. | Flash the system and |
| ||
|
| (flashing) the BIOS from a disc” on page 469 |
| 3. | Replace component under function test |
|
| |
1. Check fans | ||
| 2. | Check Power supply voltages |
| 3. | Microprocessor |
| 4. | System board |
|
| |
No action | ||
|
| |
1. Flash system | ||
| 2. | System board |
|
| |
1. Assure Asset Security Enabled | ||
| 2. | C2 Cover Switch |
| 3. | System board |
|
| |
No action | ||
|
|
|
Chapter 7.