Bosch Appliances 3.5 manual Clause / Requirement

Praesideo 3.5 Installation and User Instructions EN54-16: 2008

en 58

Clause / Requirement	Compliance	Signature
15 Marking	Praesideo is compliant.
The VACIE shall be marked with the following information,
which shall be legible at access level 1:
a the number of this European Standard;	The installer must mark the Praesideo system with the
	number of this European standard (which is legible at
	access level 1) since the installer must install and configure
	the system properly in order to let the installation comply
	with this standard.
b the name or trademark of the manufacturer or supplier;	The name ‘Bosch’ is visible on each element of the
	Praesideo system. The installer must ensure that this name
	is legible at access level 1 for all system elements.
c the type number or other designation of the VACIE.	The type number of each unit of the Praesideo system is
	present on the unit itself. The installer imust ensure that this
	type number is legible at access level 1.
It shall be possible to identify a code or number that	The hardware version and production data are visible on
identifies the production period of the VACIE at access	the type number plate of each unit of the Praesideo system.
level 1 or 2 or 3.	The installer must ensure that this type number plate is
	identifiable at access level 1, 2 or 3.
Where Annex ZA.3 covers the same requirements as this
clause, the requirements of this clause are met.
Clause / Requirement	Compliance	Signature
16 Tests	All tests as asked for in the clauses of section 16 have been
	carried out by an accredited certification body for EN54-16
	compliancy.
	The Praesideo system has been found compliant to
	EN-54-16 and received a certification of compliancy.

Bosch Security Systems 2011-02