Bosch Appliances 3.5 42.4Power amplifier, Add a power amplifier, 4: Add power amplifier, step

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 333

42.4Power amplifier

42.4.1 Add a power amplifier

Proceed as follows to add a power amplifier to the system configuration:

1Go to Configure > System definition > Power amplifier. A screen similar to the one in figure 42.4 appears in the main frame of the web interface.

3Enter the data of the power amplifier (see figure 42.7 for an example).

•Enter a name for the power amplifier in the Name field. The name may consist of up to 10 characters. The name is also shown on the display of the power amplifier.

•Select the type of power amplifier from the Type dropdown list.

•Select the purpose of the power amplifier from the Purpose dropdown list (Main PAM for a main amplifier, Spare PAM for a spare amplifier).

•Enter the hexadecimal serial number of the power amplifier in the Serial number field. See section 42.2 for information about serial numbers.

figure 42.4: Add power amplifier, step 1

2Click the Add button to add a new power amplifier to the system. A screen similar to the one in figure 42.5 appears in the main frame of the web interface.

figure 42.5: Add power amplifier, step 2

Note

It is advised to include the name of the assigned zone(s) in the naming of a power amplifier. By doing so, error messages can be directly related to the applicable power amplifiers.

Note

The serial number itself is not checked. However, the software checks that all entered characters are hexadecimal characters and that the serial number is 8 characters long or is 0.

figure 42.6: Add power amplifier, step 3

Bosch Security Systems 2011-02