Bosch Appliances 3.5 manual 19.2, 2: Component side, Controls, connectors and, indicators

2011-02 Installation and User Instructions 5 Call Stations

en 227

19.2	Controls, connectors and	S9	ID selector - A selector to identify the call
	indicators		station keypad kit to the call station to which it
The call station keypad kit (see figure 19.2) contains the			is connected (see section 19.2.4).
following:		X5, X6 Keypad interface - The keypad interface is
X800	Control inputs - The control inputs are used		used to connect up to 16 keypads to a (remote)
	as replacement for the keys on the		call station (see section 19.2.3).
	LBB4432/00 Call Station Keypad (see	X2	Jumper switch - Unused. However, the
	section 19.2.1).		jumper must be placed for correct operation.
X810	Control outputs - The control outputs are

used as replacement for the LEDs on the LBB4432/00 Call Station Keypad (see section 19.2.2).

16	15
. .
. .
. .
. .
. .
. .
. .
. .
. .			A	C	E		S9
2	1		8
			6	4	2
X800							X2
X810							16	15
1	2						. .
							. .
. .
. .							. .
. .							. .
. .							. .
. .							. .
. .							. .
. .							2	1
. .
. .		X811					X6
. .
. .
. .
.	.	+			+	-	X5
. .							16	15
. .
. .							. .
. .							. .
. .		+					. .
.	.		-				. .
.	.		+				. .
. .							. .
. .							. .
35 36				1			2	1

figure 19.2: Component side

Caution

Disconnect the system cable from the call station (kit) and back-up supplies before you are going to connect a keypad to it. Connecting a keypad to a powered (remote) call station can damage the (remote) call station.

Bosch Security Systems 2011-02