Bosch Appliances 3.5 manual 5: Installation

2011-02 Installation and User Instructions 5 Call Stations

16.4 Installation

The keypad is suitable for table-top use. It can be connected to a (remote) call station or to a keypad which already has been connected to a (remote) call station. Proceed as follows (see figure 16.5):

Caution

Disconnect the system cable from the (remote) call station and back-up supplies before you are going to connect a keypad to it. Connecting a keypad to a powered (remote) call station can damage the (remote) call station.

1Remove the lid by sliding it to the left and snapping it out of the keypad.

2Connect the flat cable to the keypad connector and assign the correct ID to the keypad. The short flat cable is for keypad to keypad interconnection; the

long flat cable (that is supplied with the call station) is for call station to keypad interconnection.

3 Slide the connecting plate into the bottom of the keypad.

4Fasten the connection plate using three screws.

5 Put the lid back by sliding it to the right and snapping it into the keypad.

1	5	2
		3
	4

figure 16.5: Installation

en 210

Bosch Security Systems 2011-02