Bosch Appliances 3.5 42.5Call station, Audio expander, Add a call station, Delete a call station

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 335

6Submit the changes. Note that the changes are not permanent until the configuration is saved (see section 40.4.4 and section 40.4.5).

42.5Call station

42.5.1 Add a call station

Adding a call station to the system definition is similar to adding a power amplifier (see section 42.4.1). Go to Configure > System definition > Call station, click the Add button and:

•Enter a name for the call station in the Name field. The name may consists of up to 16 characters.

•Select the type of call station from the Call station type dropdown list (see table 42.2).

table 42.2: Call station types

Model	Type
LBB4430/00	Basic
LBB4433/00	Basic kit
PRS-CSR	Remote
PRS-CSRK	Remote kit

•If an numeric keypad is connected to the call station, tick the Numeric keypad box.

•Select the number of connected extensions (keypads) from the extension dropdown list.

•Enter the hexadecimal serial number of the call station in the Serial number field. For the remote call station or remote call station kit, enter the serial number of the connected call station interface.

42.5.2 Delete a call station

Deleting a call station from the system definition is similar to deleting a power amplifier (see section 42.4.2). Go to Configure > System definition > Call station, select the call station that has to be deleted and click the Delete button.

42.6 Audio expander

42.6.1 Add an audio expander

Adding an audio expander to the system definition is similar to adding a power amplifier (see section 42.4.1). Go to Configure > System definition > Audio expander, click the Add button and:

•Enter a name for the audio expander in the Name field. The name may consist of up to 16 characters. The name is also shown on the display of the audio expander.

•Enter the hexadecimal serial number of the audio expander in the Serial number field.

figure 42.13: Audio expander definition

42.6.2 Delete an audio expander

Deleting an audio expander from the configuration is similar to deleting a power amplifier (see section 42.4.2). Go to Configure > System definition > Audio expander, select the audio expander that has to be deleted and click the Delete button.

figure 42.12: Call station definition

Bosch Security Systems 2011-02