Operating the cleaner

Installing the robotic vacuum cleaner

Installing the charger

Power Lamp Charging Lamp

1. Install the charger on a flat surface.

thecleaner 03 operating

2. There should be no obstacles 0.5m to the left and right and within 1 m of the front.

.5m 0 about

3. Install the charger in a location where it can be easily accessed by the robotic vacuum cleaner.

.5m 0 about

about

1m

 

4. Arrange the power cord along the wall.

5. When the floor is made of wood, install the charger in the same direction as the grain of the wood.

Always keep the power cord of the charger

NOTE plugged into the power outlet.

- If no power is supplied to the charger, the robotic vacuum will not be able to find the charger and will not be able to charge automatically.

- If the robotic vacuum cleaner is separated from the charger, the battery is automatically discharged.

Operating the cleaner _21

Page 213
Image 213
Samsung VCR8850L3R/XEO manual Installing the charger, Install the charger on a flat surface