Samsung VCR8850L3R/XEO manual Cleaning the Edge-Cleaning Side rotating Brush

Maintain tools and filter

Cleaning the robotic vacuum cleaner

Cleaning the Edge-Cleaning Side rotating Brush

You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum.

1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush.

2.Wearing rubber gloves, wrap the side rotating brush with a cloth using hot water for about 10 seconds and wipe it

on the cloth.

3. Turning the side rotating brush, repeat the procedures in Step 2.

4. If hair or string is wrapped between the main unit	L
and the side rotating brush, undo the screw of the
side rotating brush using a (+) driver to remove it.
When reassembling the brush, check the “L” mark
on the edge-cleaning side rotating brush and the “L”
mark on the main unit and then reassemble the side
rotating brush.
(Letter “R” is carved at the right side rotating brush.)

Because the side rotating brush easily attracts hair and other foreign substances, NOTE make sure to clean it frequently.

Excessive foreign substances on the side rotating brush can damage the brush.

filterand tools04 Maintain

Maintain tools and filter _41