Samsung VCR8850L3R/XEO manual Installing the Virtual Guard, Button operations

A fence (virtual wall) is formed.

Operating the cleaner

Installing the robotic vacuum cleaner

Installing the VIRTUAL GUARD

You can confine the robotic vacuum cleaner to		Mode/Power
a particular section by using Fence (virtual wall)	Mode Lamp	Button
mode or clean several sections one by one using		Main Body
Guard (virtual door) mode.		Detection Sensor
	Distance Detection Sensor

Button operations

1. Mode lamp operations

- Fence (virtual wall) Mode: The red lamp flashes.

- Guard (virtual door) Mode: The green lamp flashes.

- Off :The lamp is turned off.

2.Setting the mode

-Whenever you press the Mode/Power button, Fence

(virtual wall) mode ➝ Guard (virtual door) mode ➝ Power off is selected in this sequence.

✽The distance of virtual wall is 2.5M at minimum and may differ depending on surroundings and movement status of the robot.

Forming a Fence (virtual wall)

VIRTUAL GUARD creates an invisible barrier that the robotic vacuum cleaner cannot cross.

E.g. in front of pots, furniture, the front door, and so on.

1. Select Fence (virtual wall) mode using the Mode/	Distance
Power button.	Sensor
- The mode lamp flashes red.

2. Install the VIRTUAL GUARD in front of the area you want to block access from the robotic vacuum cleaner.

-Install the VIRTUAL GUARD so that the distance detection sensor can form an invisible barrier that the robotic vacuum cleaner cannot cross.

thecleaner 03 operating

Operating the cleaner _25