Samsung VCR8855L3B/XEF, VCR8855L3B/XEE manual Installing the robotic vacuum cleaner

Fonctionnement de l’aspirateur

Installing the robotic vacuum cleaner

Instalation order

1.Turning the Power Switch on or off

To use the robotic vacuum cleaner, you must turn on the Power Switch at the bottom of the main unit.

2.Installing the Charger

To charge the robotic vacuum cleaner, you must first install the charger.

Since the battery is discharged when the product is purchased, you must fully charge the battery before use.

3. Charging the Battery

You should charge the battery completely before using the robotic vacuum cleaner.

4. Réglage de l’heure

Vous devez régler l’heure pour pouvoir utiliser les options de nettoyage programmé et quotidien.

5.Installing the VIRTUAL GUARD

You can confine the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode or clean several sections one by one using Guard (virtual door) mode.

Turning the Power Switch on or off

To use the robotic vacuum cleaner, you must turn the

Power Switch on.

If you turn the Power Switch off, all settings will be reset.

1.Turn over the main unit and turn the Power Switch on.

- If the icons are not turned on, it indicates that the battery charge is depleted. In this case, dock the robotic vacuum cleaner to the charger station after turning the Power Switch on.

- The configured time may be different from the current time. If the configure time is incorrect, set the time to the current time.

✽Si aucune touche n’est actionnée pendant environ 10 minutes, l’appareil s’éteindra automatiquement pour économiser de l’énergie. Pour le réactiver, appuyez sur le bouton “Power” ou

“Start/Stop”.

If the Power Switch is turned off, the robotic vacuum cleaner will not be charged ATTENTION even if it is docked with the charger station.

20_ Fonctionnement de l’aspirateur