Samsung VCR8877T3A/XEG manual Fernbedienung

Inbetriebnahme des Robo-Saugers

BEZEICHNUNGEN DER TEILE

[Fernbedienung]

Ein/Aus

Auto

Richtungstasten

Manuell

Delay Start

Aufladen

Max

Punkt

Start/Stop

Kanten

Turbo

■Einsetzen der Batterien für die Fernbedienung

Batteries are not installed in the remote control when purchasing the product. Install the alkaline batteries (type AAA) before use.

1

Lift the battery compartment cover at the back of the remote control, while pressing the locking tab.

2

Install the batteries into the remote control as shown by the fi gure below. (If the batteries are installed with the wrong polarity, the remote control will not work.)

3

After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place.

✽Specifi cation: Alkaline type AAA batteries

18_ Inbetriebnahme des Robo-Saugers