Note: You must use the right softkey to select the 123 character input mode to enter the recipient’s phone number.

6.Select Done (or add additional recipients and select Done).

7.Compose a message or use the pre-set messages or icons.

￿To type a message, highlight the Message box, select Edit, and use your keypad to type a message. Use the right softkey to select a character input mode.

￿To use a pre-set message or “emoticon,” highlight

Insert and select Pre-set Msgs or Icons. Select Go, then select the message or emoticon you’d like to insert and select OK.

8.Review your message and select Send.

To read a PCS Short Mail message:

1.When you receive a short mail, you will see “New Text” on your display screen. Press .

2.You will then see “New Short Mail. Select ‘Go’ to read it.” Select Go (left softkey). (The browser will launch.)

3.Scroll to the new short mail message and press . Unread short mail messages will be marked with an asterisk (*).

Note: The last four digits from the PCS Phone Number of the person who sent you a short mail message appear before the message text. If the sender is on your short list, their nickname will appear instead of their number.

To reply to a PCS Short Mail message:

1.While the message is open, highlight Reply and press .

2.Compose your reply or use the pre-set messages or icons.

￿To type a reply, highlight the Message box, select Edit, and use your keypad to type a message. Use the right softkey to select a character input mode.

￿To use a pre-set message or “emoticon,” highlight Insert and select Pre-set Msgs or Icons. Select Go, then select the message or icon you’d like to insert and select OK.

3.Review your reply, highlight Send, and press .

Section 3: Using PCS Service Features

 

3B: PCS Vision

133