Activating Voice Recognition

Voice recognition allows you to say commands to perform common functions supported by your phone. There is no voice training required to use the voice recognition feature. You simply say the pre-designated command displayed on your screen in a normal tone of voice to perform the desired function.

To activate voice recognition:

1.Press the navigation key left or press and hold .

2.The phone prompts you to say a voice command. Wait for the beep and then say one of the following commands:

￿Digit Dial￿Name Dial￿Voice Memo￿Phone Book￿Browser￿Games

When it recognizes one of these commands, the phone launches the associated application. If the phone does not hear a command within approximately eight seconds, it de-activates voice recognition without taking any action.

Note: If you want to use a different button to activate voice recognition,

press for Launch Pad. On this menu, you can change button assignments, including the button used to launch "Voice Dial," which is the voice recognition application.

Using Digit Dial

Digit Dial allows you dial any valid 7 or 10 digit North American phone number by speaking the number naturally, without pausing between the digits.

Tips for using Digit Dial:

￿Digit Dial works best in quieter environments.

￿When saying a number, speak at a normal speed and say each digit clearly. There is no need to pause between digits.

Section 2: Understanding Your PCS Phone

 

2I: Using Your Phone’s Voice Services

87