￿If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, you can say or select No when the prompt asks, “Did the recording sound OK?”. You will then be prompted to re-record the sequence.

To adapt Digit Dial to your voice:

1.Press for Settings.

2.Press for Voice Dial.

3.Press for Adapt Digits.

4.The phone displays the first digit sequence. When you are

ready to start recording, press . The phone prompts you to say the first sequence of digits.

5.Wait for the beep, and then repeat the digits using a normal tone of voice. The phone plays back your recording and asks you if the recording sounds "OK."

6.If the recording sounds OK (no mistakes, and no background noises), say Yes. If you need to re-record the digits to fix any problems, say No. The phone then prompts you to say the digits again. Wait for the beep, and then record the digits again. Repeat this step until you are satisfied with the recording.

7.After confirming that the recording sounds OK, repeat the recording process with the next set of digits. After six sets of digits, the phone will ask you whether you want to do more adaptation. Answer Yes.

8.Repeat steps 4-8 for another six sets of digits. After the sixth set of digits, you will be half way through the session

and the phone asks “More Adapatation?” Select OK to

continue for six more sets of digits, or press for partial adapation. When you are finished with a full

session, you will reach a screen that reads, “Adaptation Complete.”

Note: It is recommended that you perform the complete adaptation of Digit Dial at least once to achieve the maximum benefit of this feature. If a partial adaptation is performed, you can always return later and resume the process from the half way point.

Section 2: Understanding Your PCS Phone

 

2I: Using Your Phone’s Voice Services

90