Samsung D102D(i), VP-D101(i) Connecting a Power Source, To use the AC Power adapter and DC Cable

ENGLISH

Preparation

Connecting a Power Source

There are two types of power source that can be connected to your camcorder.

-The AC Power Adapter and AC cord : used for indoor recording.

-The Battery Pack : used for outdoor recording.

To use the AC Power adapter and DC Cable

1. Connect the AC Power adapter to the AC cord.

2. Connect the AC cord to a wall socket.

Notes Power Switch

■ You must use the AC Power adapter of AA-E8 TYPE. ■ The plug and wall socket type may differ according to

your resident country.

3. Connect the DC cable to the DC jack socket of the camcorder.

4. Set the camcorder to each mode by holding down the tab on the power switch and turning it to the CAMERA or PLAYER mode.

To select the CAMCORDER mode (VP-D103(i)/D105(i) only)

✤If you want to use this unit as a camcorder, set the mode switch to TAPE position.

✤If you want to use this unit as a DSC (Digital Still Camera), set the mode switch to Memory Card position.

MEMORY TAPE CARD

23