Samsung VP-D200 manual Connecting a Power Source, To use the AC Power adapter and DC Cable

ENGLISH

Preparation

Connecting a Power Source

There are two types of power source that can be connected to your camcorder.

-The AC Power Adapter and AC cord : used for indoor recording.

-The Battery Pack : used for outdoor recording.

To use the AC Power adapter and DC Cable

1. Connect the AC Power adapter to the AC cord.

2. Connect the AC cord to a wall socket.

Note

■ The plug and wall socket type may differ according to your resident country.

3. Connect the DC cable to the DC jack socket of the camcorder.

(When the battery is attached on the set, you should keep outside the projection of the DC cable.)

4. Set the camcorder to each mode by holding down the tab

on the power switch and turning it to the CAM or PLAYER mode.

To select the CAMCORDER mode

✤If you want to use this unit as a camcorder, set the mode switch to TAPE position.

✤If you want to use this unit as a DSC (Digital Still Camera), set the mode switch to MEMORY STICK position. (VP-D230(i)/D250(i)/D270(i) only)

MEMORY STICK

TAPE

23