ENGLISH

Basic Recording

Adjusting the LCD during PLAY

You can adjust the LCD during playback.

The adjustment method is the same procedure as used in CAMERA mode. (see page 32)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.

When you use the LCD screen for playback, you will hear recorded sound from the built-in Speaker.

- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.

1.Set the power switch to PLAYER mode.

2.Press (PLAY/STILL) to play the tape.

3.When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the volume.

A volume level display will appear on the LCD. Levels may be adjusted between 00 to 19.

If you close the LCD while playing, you will not hear sound from the speaker.

2

3-1

<3-2>

0 : 2 3 : 4 7

5 5 min

Notes

 

 

 

When the cable is connected to the Multi-AV jack, you cannot hear sound from the speaker or

VOL.

[ 1 1 ]

1 2 : 0 0

adjust the volume.

1 0 . J A N . 2 0 0 4

If a cable is connected to the Multi-AV jack, you can hear sound from the speaker when AV IN/OUT MODE on MENU is set to AV IN or S-VIDEO IN. (VP-D323i/D325i/D327i only)

35

Page 35
Image 35
Samsung D325(i), VP-D323(i), D327(i) manual Controlling Sound from the Speaker, Adjusting the LCD during Play