ENGLISH

Advanced Recording

Audio dubbing

The AUDIO DUBBING function only works in PLAYER Mode.

You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.

Use the internal and external microphones or other audio equipment.

The original sound will not be erased.

Dubbing sound

1.Set the camcorder to PLAYER mode.

If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder.

When you wish to dub using the External A/V input, connect the Multi-AV cable to the camcorder by inserting the Multi-AV cable into the Multi-AV Jack at the rear of the camcorder.

(VP-D323i/D325i/D327i only)

-Press the MENU button, move the MENU SELECTOR to highlight A/V and push the MENU SELECTOR.

-Move the MENU SELECTOR to highlight AV IN/OUT and push the MENU SELECTOR to select AV IN.

2.Press the (PLAY/STILL) button and find the timeframe of the scene to be dubbed.

3.Press the (PLAY/STILL) button to pause the scene.

4. Press the A.DUB button on the Remote Control.

A.DUB will be displayed on the LCD.

The camcorder is in a ready-to-dub state for dubbing.

5. Press the (PLAY/STILL) button to start dubbing. Press the (STOP) button to stop the dubbing.

Notes

Audio (L)Audio (R)

AV IN

(VP-D323i/D325i/D327i only)

You can not use the audio dubbing function while playing a write protected video tape.

When you wish to dub using the External A/V input, you must connect the Multi-AV cable to the audio system from which you wish to record. (VP-D323i/D325i/D327i only)

You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.

65

Page 65
Image 65
Samsung D325(i), VP-D323(i), D327(i) manual Audio dubbing, Dubbing sound