Power button

ENGLISH

Using the External Camera Module : Connecting the External Camera Module

Connecting the External Camera Module to CAM

1. Connect the extension cable to the AV Input/Output terminal of the CAM. You can connect the External Camera Module Controller’s connector to the AV Input/Output terminal of the CAM.

2. Connect the extension cable to the External Camera Module Controller’s connector. You may fix the External Camera using Tripod Receptacle or Mounting Band.

Notes

✤When the External Camera Module is connected to AV Input/Output of the Cradle, the Record Strat/Stop button of the External Camera Module does not operate.

✤If you set the Hold function with the MP3/External Camera Hold switch, you can’t delete, lock or copy music files. You can only use Power switch and volume [+]/[ - ] buttons.

Recording Video Using the External Camera Module

Using External Camera Module accessory, enjoying sports activity can be directly recorded.

Before using, insert batteries in External Camera Module.

1.Setup the External Camera in the Video In mode. (See page 39)

2.Connect the External Camera Module to the AV Input/Output terminal of the CAM.

3.Press the [Power] button on the External Camera Module.

4. Press the [Record Start/Stop] button on the External Camera Controller to start recording.

Record Start/Stop

◆ LED lamp lights in red.

The elapsed and remaining times are displayed and it starts recording.

5. Press the [Record Start/Stop] button again to stop recording.

◆ It stops recording and the CAM is ready again.

6. Press the [Power] button again to turn off the External Camera Module.

Notes

✤ When the External Camera Module is connected, [Record/Stop] button of the main set does not operate.

✤ When recording signal from the External Camera Module, the [Power] button of the External Camera Module does not operate.

✤ Do not connect the Cradle when the Line Input of the set is in use.

108