Samsung VR10F71UCDC/ML manual Spot Cleaning, Station, spot cleaning is not supported, Mode

Spot Cleaning

You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc.

■ Move the vacuum cleaning robot to the location where you want to perform a spot clean.

About 1.5m

About 1.5m

Main unit button	Remote control	Configuration
	button	Sequence
	1.	Set the mode.
▶
2time
	2.	Cancel the mode.

Normal Mode

-In Spot cleaning mode, the vacuum cleaning robot cleans an area with a length of 1.5m and a width of 1.5m.

-When cleaning is completed, the vacuum cleaning robot will display End, Stop, and Stand by.

	When the vacuum cleaning robot is docked with the charger
NOTE	station, spot cleaning is not supported.
	• Each time you press the Turbo button, the Turbo icon on
CAUTION	the display panel is turned on or off sequentially. When the
	Turbo icon is turned on, you can start cleaning in Turbo
	mode.

•Each time you press the Dust Sensor button, the Dust Sensor icon on the display panel is turned on or off sequentially. When the Dust Sensor icon is turned on, you can start cleaning in Dust Sensor mode.

Turbo Mode

Dust Sensor Mode

Cleaning Complete

30_ operating