15.11 Programming language
■Press the key PROG.
■By pressing the keys + or - you can select the required language.
■To store, press the key PROG.
■Press the key + in order to reach the next phase or the key EXIT to quit the programming.
16.7 Fill beans
■ | : FILL COFFEE BEANS |
| |
■ Fill with beans as described in Chapter 3.4. | E | ||
|
| The display FILL COFFEE BEANS goes off after a | |
|
|
coffee.
We recommend that you clean the bean container out with a dry cloth from time to time before filling. For this, switch the machine off.
16.Care and maintenance 16.1 Fill water
■ : FILL WATER TANK
■When this display lights up, no more
The water tank should be rinsed out every day and filled with fresh water.
If you use an automatic filling device, we recommend that you rinse the water tank out regularly and fill it up with fresh water.
16.2 Installation of an automatic filling device
Please read the operating instructions of the automatic filling device.
16.3 Empty grounds container
The grounds container collects the coffee grounds.
■ : EMPTY DRAWER
■When this display lights up, no more
■Carefully remove the drip tray – there is water in it. Then remove the grounds container (Fig. 4).
16.4 Empty drip tray
■ : EMPTY DRIP TRAY
■When this display lights up, no more
■Carefully remove the drip tray – there is water in it (Fig. 4).
16.5 Grounds container missing
■ : DRAWER MISSING
■When this display lights up, the grounds container has not been in- serted properly or is missing.
16.6 Drip tray missing
■ : DRIP TRAY MISSING
■When this display lights up, the drip tray has not been inserted properly.
16.8 Removing foreign objects
■Switch your machine off with the ON/OFF operating switch.
■Remove the plug from the power socket.
■Open the hinged door on the reverse of the machine (Fig. 5).
■Press the slides downwards (Fig. 6) and remove the bean con- tainer.
■Remove any beans with a vacuum cleaner.
■Position the spanner (Fig. 7).
■Turn the spanner in an
■Remove remaining powder with a vacuum cleaner.
■Now replace the bean container and pull the slides to the front before closing the door (Fig. 6).
16.9 Clean machine
■ : CLEANING NECESSARY
After 220
Carry out a cleaning (Chapter 19).
16.10 Machine scaled
■ : DECALCIFYING NECESSARY
The machine recognises the necessity of
16.11 Clean contacts
■ : EMPTY DRIP TRAY / CLEAN CONTACTS
The
■Rinse the contact fasteners in trough (B) (Fig. 8) as well as the con- tacts (A) with hot water and
16.12 General cleaning instructions
■Never use abrasive articles or corrosive chemicals to clean your machine.
■Wipe off the inside and outside of the casing with a soft, damp cloth.
■Clean the pivoting nozzle after every use.
11