Important information for the user
Thank you for choosing this JURA product.
Please study these instructions carefully before using your new ma- chine and keep them in a safe place for easy reference in the future. Should you require further information or should particular problems occur that are not dealt with in sufficient detail for you in these oper- ating instructions, then please ask your local dealer for the informa- tion you require or get in touch with us directly.
You will also find useful tips on operation and maintenance of your IMPRESSA
Don’t forget to check out the Knowledge Builder our animated operating instructions. LEO, our assistant, will take you through all the functions.
■Never put the machine or parts of it into the dishwasher.
■To prevent overheating, please put the machine in a place with a good circulation of air.
■ If you use | E |
and drips on sensitive surfaces, in particular natural stone and | |
wood surfaces, straight away or take corresponding safety precau- |
|
tions. |
|
3. Preparing the machine
3.1 Checking the mains voltage
The machine has been set to the correct mains voltage in the factory. Ensure that your mains voltage corresponds to the details on the rating plate attached to the reverse of your machine (Fig. 1/A).
1. Description
The first IMPRESSA for the office and small gastronomy area is out- standing not only because of its modern technology, but also a num- ber of features, and prepares 1 or 2 cups of espresso/coffee in only one brewing process. The Intelligent Pre Brew Aroma System (I.P.B.A.S.©) ensures that the full coffee aroma is made use of and supplies the best espresso/coffee, guaranteed to be covered by a splendid froth. Optionally, coffee can be used from either of the grinders, and the mixture can be programmed individually.
3.2 Checking the fuse
Check whether the fuse matches your machine.
3.3 Filling the water tank
■Remove the water tank and rinse it out well with cold tap water.
■Then fill the water tank and put it back into the machine. Please ensure that the tank locks in properly .
Please only use fresh, cold water. Never fill up with milk, min- eral water and other fluids. You can also top up water without removing the tank. Simply remove the cover and pour in the water from above with a vessel and replace the lid again.
2.Safety instructions 2.1 Warnings
■Children are unaware of the dangers that can be caused by electrical machines; for this reason, children should never be left unsupervised with electrical machines.
■The machine may only be used by people who have been instructed.
■Never use a faulty machine or one with a damaged power cable.
■Never repair or open the machine yourself. Repairs may only be done by authorised service centres using original spare parts and accessories.
■Never immerse the machine in water.
3.4 Adding coffee beans
To ensure that your machine gives satisfaction for a long time and to avoid repairs, please note that the grinder on your JURA coffee machine is not suitable for coffee beans that have been treated with additives (e.g. sugar) during or after roasting. Use of such coffee blends can result in damage to the grinder. Any repair costs incurred as a result are not covered by the warranty provisions.
You have the possibility of adding two different sorts of coffee beans.
■Remove the cover from the bean container.
■Clean out any dirt or foreign objects from the bean container.
■Fill coffee beans into the bean container and replace the cover again.
2.2 Safety precautions
■Never expose the machine to the effects of weather (rain, snow, frost) and never operate it with your hands wet.
■Place the IMPRESSA on a firm, level base that is resistant to any wa- ter that may leak. Never stand on hot or warm surfaces (oven hobs). Keep out of the reach of children.
■Remove the plug from the power socket if you are away for some time (holidays etc.).
■Always remove the plug from the power socket before cleaning.
■When removing the plug from the power socket, never tug on the cord or the machine itself.
■The machine is connected to the mains power socket via an electric cable. Please ensure that
4. Switching the machine on
■Operate the switch on the reverse of the machine (Fig. 1/II).
■Switch the machine on with the ON/OFF 
operating switch.
■
: PLEASE WAIT
■Place an empty cup under the coffee spout (4).
■
: RINSE UNIT
The rinsing is done first via the Cappuccino nozzle, after which the coffee spout is cleaned.
7
