10. Coffee
10.1 Drawing off coffee / espresso
■
: SELECT PRODUCT
■Place 1 or 2 cups, as necessary, under the coffee spout (4) and press the required selection switch. The
You can interrupt the
13. Drawing-off milk froth
■
: SELECT PRODUCT
■Pour milk/Tetra Pak into a jug and immerse the Cappuccino tube
into the milk. | E |
| |
■ Place 1 cup under the coffee spout (4) and press the |
|
key . |
|
The programme amount is prepared and stops automatically. |
|
You can interrupt the
10 min. after the
10.2 Drawing off cappuccino
■
: SELECT PRODUCT
■Put milk/Tetra Pak into a jug and immerse the cappuccino tube into the milk.
■Place 1 cup under the coffee spout and press the 
. The machine firstly prepares the milk froth, then the coffee (Fig. 3).
You can interrupt the milk froth and the coffee prematurely by pressing the
10 min. after the
10.3 Drawing off pots of coffee
■
: SELECT PRODUCT
■Place 1 pot under the coffee spout (4) and press the
You can interrupt the
11. Drawing off hot water
■
: SELECT PRODUCT
■Place a cup under the pivoting nozzle (18) and press the 
.
■
: PORTION HOT WATER
■The
You can interrupt the
When water is drawn off, there can be splattering at the beginning. The pivoting nozzle becomes hot. Avoid direct contact with the skin.
12. Drawing off steam
■
: SELECT PRODUCT
■Place a cup with the liquid to be heated under the pivoting nozzle (18) and press the 
.
■
: STEAM ACTIVE
■To end the 
.
When steam is drawn off, there can be splattering at the beginning. The pivoting nozzle becomes hot. Avoid direct contact with the skin.
14. Switching the machine off
■Switch the machine off with the ON/OFF 
operating switch. A rinsing is automatically started when the machine is switched off.
15. Programming
The following phases can be programmed:
▶Grinding amount
▶Temperature
▶Amount of water
▶Amount of milk
▶Portion of hot water
▶Water hardness
▶Clock
▶Machine on
▶Machine off
▶
▶Language
15.1 Programming grinding amount
■Switch your machine on the with ON/OFF 
operating switch.
■Press the key PROG. until an acoustic signal is heard.
■
: ADJUST COFFEE QUANTITY / SELECT PRODUCT
■Press the required
■
: (selected product)
–..............II.............. +
■By pressing the key + or - you can determine the amount to be ground.
■To store, press the key PROG.
■
: (selected product)
: 100% : 0%
You can determine the allocation of the grinder “left” or “right”.
■By pressing the key + or - you can change the values.
■To store, press the key PROG.
■
: ADJUST COFFEE QUANTITY / SELECT PRODUCT
■Press the required
9
