15.2 Programming Temperature
■ : ADJUST TEMPERATURE / SELECT PRODUCT
■Press the required
■ : (selected product)
STAND. TEMP.
■Select the required temperature with the keys + or - (high or standart)
■To store, press the key PROG.
■ : ADJUST TEMPERATURE / SELECT PRODUCT
■Press the required
15.3 Programming amount of water
■ : ADJUST WATER QUANTITY / SELECT PRODUCT
■Press the required
■ : (selected product)
WATER 90 ML
■You can change the value by pressing the key + or
■To store, press the key PROG.
■ : ADJUST WATER QUANTITY / SELECT PRODUCT
■Press the required
15.4 Programming amount of milk
■ : ADJUST MILK QUANTITY / SELECT PRODUCT
■Press the key or
■ : (selected product)
10SEC.
■You can alter the time by pressing the keys + or -
■To store, press the key PROG.
■ : ADJUST MILK QUANTITY / SELECT PRODUCT
■Press the required
15.5 Programming portion of hot water
■Place a cup under the pivoting nozzle (18).
■ : HOT WATER PORTION / PRESS FOR HOT WATER
■ : ENOUGH HOT WATER ? / PRESS FOR HOT WATER
■ : HOT WATER PORTION / PRESS FOR HOT WATER
■Press the key + in order to reach the next phase or the key EXIT to quit the programming.
■Press the key + in order to reach the next phase or the key EXIT to quit the programming.
To determine the water hardness, please read Chapter 8 “Setting the water hardness”
15.7 Programming CLOCK
Programming the clock is necessary if the function “Machine on” is used.
■ : TIME.
■Press the key PROG.
■By pressing the keys + or - you can set the hours.
■To store, press the key PROG.
■By pressing the keys + or - you can set the minutes.
■To store, press the key PROG.
■Press the key + in order to reach the next phase or the key EXIT to quit the programming.
15.8 Programming machine on
Programming the clock is necessary if the function “Machine on” is used.
■ : UNIT ON
■Press the key PROG.
■By pressing the keys + or - you can set the hours.
■To store, press the key PROG.
■By pressing the keys + or - you can set the minutes.
■To store, press the key PROG.
■Press the key + in order to reach the next phase or the key EXIT to quit the programming.
The display
15.9 Programming machine off
■ : UNIT OFF
5.0HRS.
■Press the key PROG.
■ By pressing the keys + or - you can set the hours (switched off or 0.5 hrs. – 9 hrs.).
■To store, press the key PROG.
■Press the key + in order to reach the next phase or the key EXIT to quit the programming.
15.6 Programming water hardness
■ : WATER HARDNESS LEVEL 3
■Press the key PROG.
■You can set the water hardness by pressing the keys + or
■To store, press the key PROG.
15.10 Draw-offs
■ : AUDIT TRAIL (total audit trail)
■Press the required
■Press the key + in order to reach the next phase or the key EXIT to quit the programming.
10