Charging
After completely charging the POWERbot for the first time (after purchase), it can be used for 60 min. in Nomal (
) mode. (Refer to the page 39 for the charging time.)
Smart Charging
If POWERbot runs out of charge in Auto clean mode, it will automatically return to the docking station to be charged and will recommence the cleaning to complete the cleaning area after two- third of battery charging is done. (Max. 2 times).
• Rated input voltage of
WARNING this product is 100- 240 V~.
<SR10M701*** Series>
<SR10M702*** / SR10M703*** /
SR10M704*** / SR20M70**** Series>
1Turn on the emergency switch on the bottom
You must turn on the emergency switch to turn on the POWERbot.
Press and release the
button.
2Manually charge the POWERbot by placing it on the docking station
Make sure the charging pins on the POWERbot and the docking station are aligned.
3Check the charging status
For SR10M701*** Series,
The battery indicator blinks at 1 sec. intervals during charging and the indicator will remain in ON status when fully charged.
For SR10M702*** / SR10M703*** / SR10M704*** / SR20M70**** Series,
"
" will turn on according to charging progress and "FULL" will turn on when charging is complete.
