Samsung VR10M701SUW/EE POWERbot is caught, stuck or trapped while, Moving around, ENGLISH-34

Information codes

<SR1*M702***, SR1*M703***, SR2*M70**** series>

1 The information	2 Turn off the
code below is	emergency switch
shown with an	and check the
error alarm.	below instructions
	and take
	appropriate action

3 Information code will disappear when you turn on the emergency switch

Information codes	Checklist
	The POWERbot is caught, stuck or trapped while
	moving around.
	ffTurn off the emergency switch and move the POWERbot to
	another area.
	Foreign matter caught in the brush.
	ffTurn off the emergency switch and remove the foreign matter
	from the brush.
	Foreign matter caught in the left Driving wheel.
	ffTurn off the emergency switch and remove the foreign matter
	from the Driving wheel.
	Foreign matter caught in the right Driving wheel.
	ffTurn off the emergency switch and remove the foreign matter
	from the Driving wheel.
	Bumper sensor needs to be checked.
	ffTurn off the emergency switch and turn it back on.
	ffWhen information code does not disappear, check if there's any
	small foreign matter between the bumper and the main body.
	If there is, pull the bumper slightly and remove the foreign
	matter.
	Foreign matter accumulated on the obstacle sensor.
	ffTurn off the emergency switch and clean the front and rear
	sensor with a soft cloth.
	Foreign matter accumulated on the cliff sensor.
	ffTurn off the emergency switch and clean the cliff sensor with a
	soft cloth.
	Main PCB needs to be checked.
	ffTurn off and restart the product. If the same problem occurs
	repeatedly, a service check is required.

ENGLISH-34

1_VR7000_EN_DJ68-00763F-06_EE.indd 34 2017-12-19 오후 7:28:09