![](/images/new-backgrounds/1292707/29270731x1.webp)
Using the remote control
1 Power/Recharging
[A Type] | [B Type] | |
Power | Turn POWERbot's power on/off | |
Recharging | Select to recharge POWERbot at the charger while it | |
is in cleaning process | ||
|
2 Cleaning mode
Auto clean | Select to automatically clean the entire space once | |
Spot clean | Select to clean a localized area intensely | |
Max clean | Select to make POWERbot to clean until battery | |
indicator flashes after reaching down to one level | ||
| ||
Manual clean | Select to manually control and clean by using the | |
remote control | ||
| ||
Start/Stop | Select to start or stop cleaning process |
3 Additional function
Silence mode | Select to clean with lower operation noise | |
✻✻Turbo mode is not available | ||
| ||
| In Auto clean mode | |
| ffWhen dust intake is detected, suction of | |
Dust sensor | POWERbot will become stronger and it will move | |
around that area to focuses on cleaning the | ||
mode | surrounding area. | |
| In Spot/Max/Manual clean | |
| ffWhen dust intake is detected, suction of | |
| POWERbot will become stronger. | |
Sound | Each time you press this button, Sound Effects → | |
Mute is selected in this sequence. | ||
| ✻✻Remote control function NOT supported. |
Inserting batteries
Open the battery cover by lifting it up while pressing the locking tab and insert the batteries as shown in the illustration. Then, close the cover until it clicks into place.