Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.Cleaning the dustbin
Clean the dustbin when filter inspection indicator ( 
) turns on or if there's too much dust in the dustbin.
| 1 Remove the dustbin | 2 | Remove the dustbin | 3 | Remove dust in the |
|
| cover |
| dustbin and cyclone |
|
|
|
| unit |
|
|
|
| "Click" |
4 Detach the cyclone unit 5 Reassemble thefrom the dustbin cover dustbin then wash the dustbinand the filter
6 Reinsert the dustbin into the main body until it clicks
Cleaning the sensors and the camera
Lightly wipe with soft cloth.Camera 
Front sensor | Cliff sensors | Rear sensor | |
window | window | ||
|