Automatic charging
Recharging |
When the battery indicator blinks during cleaning, the vacuum cleaning robot will return to
the charger to charge itself automatically.
You may command the vacuum cleaning robot to recharge at the charger while it is in cleaning process.
Low battery (Lo)
Manually charge the vacuum cleaning robot by placing it on the charger.
Steps to take if recharging is not being executed
Check the installation status of the charger when:
▶▶charger is located in a place where vacuum cleaning robot cannot easily access
▶▶distance of the charger and vacuum cleaning robot is over 5 m apart
Manually charge the vacuum cleaning robot when:
▶▶charger is located in a corner ▶▶battery is fully exhausted
▶▶vacuum cleaning robot is stuck by obstacles (furniture etc.)
▶▶vacuum cleaning robot can't climb threshold near charger (Height of the threshold that vacuum cleaning robot can climb: about 1.5 cm and below)
▶▶when battery indicator blinks and "Lo" is displayed
▶▶when the vacuum cleaning robot is set on Spot clean or Manual clean mode
