Samsung VR20H9050UW/GE manual Using the remote control, Power/Recharging, Cleaning mode

Using the remote control

1 Power/Recharging

[A Type]	[B Type]
Power	Turn the vacuum cleaning robot's power on/off
Recharging	Select to recharge the vacuum cleaning robot at the
	charger while it is in cleaning process

2 Cleaning mode

Auto clean	Select to automatically clean the entire space once
Spot clean	Select to clean a localized area intensely
Max clean	Select to make the vacuum cleaning robot to clean
	until battery indicator flashes after reaching down to
	one level
Manual clean	Select to manually control and clean by using the
	remote control
Start/Stop	Select to start or stop cleaning process

3 Additional function

Silence mode	Select to clean with lower operation noise
	✻✻Turbo mode is not available
	In Auto clean mode
	▶▶When dust intake is detected, suction of the
Dust sensor	vacuum cleaning robot will become stronger and it
	will move around that area to focuses on cleaning
mode	the surrounding area.
	In Spot/Max/Manual clean
	▶▶When dust intake is detected, suction of the
	vacuum cleaning robot will become stronger.
Sound	Each time you press this button, Sound Effects →
	Mute is selected in this sequence.
	✻✻Remote control function NOT supported.

Inserting batteries

Open the battery cover by lifting it up while pressing the locking tab and insert the batteries as shown in the illustration. Then, close the cover until it clicks into place.

ENGLISH-16