Charging
It takes approximately 160 minutes (SR20J90✴✴U Series) or 240 minutes (SR20K9000U✴ Series) to completely charge the POWERbot when charging it for the first time after purchase. Once charged, the POWERbot can be used for approximately 30 minutes.
Charging light turns green during charging.
(ONLY SR20J90✴✴U Series)
• Rated input voltage of
WARNING this product is 100-
240 V~.
1Turn on the emergency switch on the bottom
You must turn on the emergency switch to turn on the POWERbot.
2Manually charge the POWERbot by placing it on the docking station
Make sure the charging pins on the POWERbot and the docking station are aligned. For SR20K9000U✴ series, turn on the POWERbot by pressing and holding the 
for more than 3 sec. to start charging.
3Check the charging status
“
” appear in the sequence to show charging progress. All the 6 icons appear when charging is complete.
