setting up your washer

Delicate course

Use this course to wash delicate clothing items such as washable sweaters, cardigans, and other delicate items.

1.Press the Power button to turn the washer “On”.

2.Press the Course select button.

3.Press the Start/Pause button. The water level is automatically selected at the mid-level between Mid-low and Extra low. You can also adjust the water level manually.

4.The wash, rinse, and spin cycles follow.

5.To pause a course, press the Start/Pause button again. You can change the course when it is paused.

6.Close the lid.

•You can select only Cold water.

•The last spin cycle is a light cycle to prevent wrinkles.

•Use only detergent indicated by the laundry.

•Refer to the Care Label on the clothing for the appropriate wash information.

•Make sure buttons are fastened and that clothing is turned inside out.

•In the Delicate course, Air Turbo and Silver Wash functions cannot be selected as it may damage delicate items.

Memory course

Use this course to create your very own favorite or frequently used courses and store them in the washer so that you can select them at any time.

1.Press the Power button to turn the washer “On”.

2.Press the Course select button.

3.Select your frequently used functions.

Select Wash, Rinse, Spin or Silver Wash according to your requirements.

4.Press the Start/Pause button to store them.

Only stored when the Wash + Rinse + Spin steps are selected.

5.Add detergent and softener according to the water level and close the lid.

•If you select the Memory course after turning the washer “On”, the stored settings are automatically retrieved.

•To change the stored settings, select the Memory course, reconfigure the settings and then press the Start/Pause button. Then, the changes are stored.

Clean Tub course

Use this course to clean the tub. It will keep the tub clean and sanitary.

1.Press the Power button to turn the washer “On”.

2.Press the Course select button.

3.Press the Start/Hold button.

4.Add a delicated detergent and close the lid.

•Never place laundry in the tub when cleaning inside the tub, as this can cause discoloration or damage to the laundry.

•When doing the laundry after cleaning the tub, you may find some impurities. These are just detergent residues and impurities after the tub cleaning. Perform the rinse cycle two to three times.

•The Soak function is set automatically.

•The initial water level is selected at the mid-level between Maximum and Mid.

10_ setting up your washer

WA14P9PIC-02561E-02_EN.indd 10

 

 

2013-01-15 �� 11:48:16