PROBLEM

CHECK & SOLUTION

 

 

The water leaks at the water supply

If the faucet connecting part is loose, water may leak.

hose connector.

Repeat the assembling steps again. (Refer to “Connecting the

 

water supply hose”)

 

 

 

Check if the rubber ring of the water supply hose is in the right

 

position.

 

Fit it tightly again.

 

 

 

Is the water supply hose folded?

 

Unfold the hose.

 

 

 

If the water supply is too strong, water may leak.

 

Close the faucet a little.

 

 

 

Is water leaking from the faucet itself?

 

Fix the faucet. Water is not supplied.

 

 

 

Did you press the Start/Pause button after selecting the water

 

supply?

 

The Start/Pause button must be pressed for water, for water

 

to be supplied. Press the Start/Pause button.

 

 

 

Make sure that the faucet is on.

 

Turn on the faucet.

 

 

 

Check if the filter net at the water supply hose connector is

 

clogged with dirt.

 

Clean the filter net using a toothbrush.

 

 

 

Make sure the water supply is on.

 

If the water supply is suspended, turn both the faucet and

 

power on.

 

 

Spinning causes loud noises and

Check if the laundry is spread out evenly in the washer.

vibrations.

Spread out the laundry evenly and start again.

Check if the washer is balanced and level on a sturdy flat floor surface.

Ensure that the washer is level.

Check if the leveling legs are loose.

Adjust the leveling legs so that the washer is even.

Ensure that the washer is not surrounded with unnecessary items.

Remove anything unnecessary away from the washer.

04troub leshoo ting

troubleshooting _25

WA14P9PIC-02561E-02_EN.indd 25

 

 

2013-01-15 �� 11:48:21