AAConnecting the Cover-Stand (WAM750, WAM751 Only)1Before attaching the Cover-Stand, remove the

rear cover. Insert the power cable through the Cover-Stand hole into the M7 power port.

2The inside of the Cover-Stand has two sides. One side (A) has four tabs - two large tabs and two small tabs. The other side (B) has two large tabs only. Insert the two large tabs on side A into the two slots in the area marked A in the diagram.

3Turn the M7 so the side marked B in the diagram is facing you. With the thumbs of both hands, press side B of the Cover-Stand so that the tabs on side B snap into the slots in the area marked B in the diagram. You may need to press side B of the Cover-Stand with some force.

4The M7 can now be installed vertically. Caution99Do not place the M7 on an unstable surface.

NOTES

99Turn the speaker upright using the stand to set the speaker to MONO mode.

99Turning the product upright or laying it down in the middle of playing music may temporarily cause unstable sound.

4444

10

A

B

➡